C6 Crane Course – 4 days – Melbourne 

If you’re looking to complete your C6 crane course in Melbourne, Go Workplace Training offers nationally recognised, WorkSafe-approved training at our Dandenong South facility. Our C6 crane licence course covers everything you need to operate a slewing mobile crane of up to 60 tonnes from pre-operational safety checks to complex lifts in live work environments.

Whether you’re entering the crane industry for the first time or formalising years of on-the-job experience, our 4-day crane operator course in Victoria gives you the practical skills and the nationally recognised unit of competency, required to apply for your WorkSafe High Risk Work Licence.

Go Workplace Training is one of Victoria’s most experienced Registered Training Organisations (RTO 22464), with over 20 years delivering high-risk work licence training to individuals and businesses across the construction, civil, mining, and logistics industries.

The C6 crane licence is a WorkSafe High Risk Work Licence (HRWL) that authorises the holder to operate a slewing mobile crane with a capacity of up to 60 tonnes. It is issued under the Occupational Health and Safety Act and Regulations (OHS) legislation and is legally required before operating this class of crane on any Australian worksite.

The C6 is one of the most widely held crane licences in Victoria. Slewing mobile cranes are commonly used across construction, infrastructure, mining, and heavy industry, making this course one of the most in-demand in the high-risk work sector.

The unit of competency behind the C6 licence is TLILIC0023 Licence to operate a slewing mobile crane (up to 60 tonnes). This unit is assessed both by your Registered Training Organisation (Go Workplace Training) and by a WorkSafe-approved assessor (C6 Licence Assessment) before your licence is issued.

The C6 licence allows you to operate:

• Slewing mobile cranes with a capacity of 60 tonnes or less
• Non-slewing mobile cranes (CN class)
• Reach stackers
• Vehicle loading cranes with a capacity of 10 metre tonnes or more (but does not include the application of load estimation and slinging techniques to move a load using a vehicle loading crane)
• Telehandlers 

This makes the C6 one of the most versatile crane licences available, covering a broader range of equipment than many operators realise. If you’re also researching CN crane courses in Victoria, it’s worth knowing that a C6 licence already includes non-slewing mobile crane operation.

Our C6 crane course in Melbourne is delivered over 4 days at our Dandenong South training facility, located at 16 Kitchen Road, Dandenong South VIC 3175, conveniently accessible from across Melbourne’s south-east and greater Melbourne region.

The course combines pre-study and homework before your 4 day face-to-face sessions, ensuring that class time is focused on theory review, hands-on, practical training. Our instructors are experienced crane operators and workplace trainers who bring real-world site knowledge into every session.

For those who need more flexibility, we also offer a 5-day face-to-face option, as well as the ability to discuss weekend delivery or customised scheduling. We understand that tradespeople and site workers have demanding schedules. Talk to us and we’ll do our best to find an option that suits you.

Upon successful completion of the unit of competency and the WorkSafe licence assessment, you’ll receive a Notice of Assessment (NOA), which you use to apply for your C6 licence through the MyWorkSafe portal or at Australia Post.

Course snapshot:

• Unit: TLILIC0023 Licence to operate a slewing mobile crane (up to 60 tonnes)
• Licence Class: C6 Slewing mobile crane (up to 60 tonnes)
• Duration: 4 days (includes some pre-study and homework followed by 4-days face to face sessions with us )
• Location: Dandenong South, Melbourne VIC
• Delivery: Pre-study + face-to-face, practical training
• RTO: Go Workplace Training (RTO 22464)
• Outcome: Unit Statement of Attainment + WorkSafe High Risk Work Licence (C6)

Our C6 crane operator course in Victoria is designed for a wide range of participants, from complete beginners to experienced operators looking to formalise their skills with a nationally recognised course.

This course is ideal for:

• Construction workers and site labourers seeking to advance into crane operation
• Riggers and doggers looking to expand their scope of work by adding crane operation
• Civil construction and infrastructure workers who regularly work alongside cranes and want to understand operations from the operator’s perspective
• Mining and resources workers who require a crane licence as part of a site induction or employment requirement
• Business owners and site supervisors who need to ensure their team holds the correct licences

The crane industry in Victoria and across Australia, has a consistent and growing demand for licensed operators. Completing your crane licence course near you in Melbourne positions you for employment across construction, infrastructure, resources, and transport industries, where crane operators are consistently listed among the most sought-after tradespeople.

A slewing mobile crane is a crane fitted with a boom or jib capable of rotating (slewing) 360 degrees. These cranes are mounted on a mobile base, typically a wheeled or tracked chassis, allowing them to be driven to and positioned on site.

Slewing mobile cranes are among the most versatile and commonly used lifting machines in the construction and civil industries. They are used to:

• Lift and position structural steel beams and columns
• Place precast concrete panels and tilt-up construction elements
• Install plant and equipment in industrial settings
• Move heavy materials across large construction sites
• Support civil works including bridge construction and infrastructure projects
• Assist with demolition and remediation activities

The C6 licence covers slewing mobile cranes up to 60 tonnes, the class most commonly encountered on commercial construction, residential high-rise, and civil projects across Victoria.

What the C6 does not cover: If you need to operate cranes above 60 tonnes, you will require an additional licence. The C1 licence covers cranes up to 100 tonnes, and the C0 covers cranes over 100 tonnes. The C6 does not cover tower cranes, which require a separate CT licence class.

Our C6 crane course in Melbourne covers the full range of competencies required to safely plan, set up, operate, and shut down a slewing mobile crane in a commercial worksite environment. The course is designed to meet the requirements of the unit of competency and WorkSafe’s High Risk Work Licence assessment standards.

Course topics include:

• Planning and preparing for crane work, including site assessment and lift planning
• Pre-operational safety checks and equipment inspection procedures
• Reading and interpreting load charts to calculate safe working loads
• Selecting the appropriate crane configuration and lifting gear for the task
• Identifying hazards in the work area and applying appropriate risk controls
• Setting up the crane correctly, including outrigger placement and ground bearing calculations
• Lifting, moving, and placing loads safely and in accordance with the lift plan
• Using hand signals and two-way radio communication with doggers and riggers on the ground
• Working with different load types, including suspended loads and awkward loads
• Following OHS legislative requirements and WorkSafe regulatory standards
• Responding to problems, equipment malfunctions, or unexpected site conditions
• Parking and shutting down the crane safely at the completion of operations

By the end of the course (at the successful completion of the course requirements, including assessments), you will have the skills and knowledge to conduct safe crane operations in a range of worksite environments and the course completion documents needed to apply for your WorkSafe C6 High Risk Work Licence.

To enrol in the C6 crane course in Victoria, you must meet the following selection criteria:

• Age: Be 18 years or older
• Language, Literacy, Numeracy and Digital (LLND) skills: You must be able to use English and maths for safety, training, and assessment, including reading, writing, and communicating. All students are required to complete an LLND skills assessment (or discuss their LLND capability with us prior to enrolment so we can confirm course suitability)
• Health and fitness: Be in good health and physical condition appropriate to operate heavy machinery and work on active construction sites
• Residency: Reside in Victoria, or hold valid reasons for applying for a Victorian WorkSafe licence
• Visa: Hold a valid visa to study in Australia if you are not an Australian or New Zealand citizen or permanent resident

Not sure if you’re eligible?

We recommend reviewing the sample course documents below before enrolling:

• LLND Assessment – complete the sample assessment to gauge suitability
• Learner Guide sample pages – review the crane safety procedures covered in the course
• Activity Book sample pages – attempt the sample activity pages to test your readiness

If you have specific learning needs, a disability, language support requirements, or any other concerns about course suitability, please reach out to us before enrolling. We are committed to providing inclusive, supported training and will do our best to help you access the right option for your needs.

Course fees for the C6 crane licence course are listed on our current fee schedule. 

Please note: The WorkSafe High Risk Work Licence fee is a separate government fee, paid directly via the MyWorkSafe portal or at an Australia Post outlet following the successful completion of your assessment. This fee is set by WorkSafe Victoria and is not included in the course fee.

For information about refunds, payment options, and financial assistance, please refer to the resources available in the Resources tab on this page.

When it comes to completing your crane licence course in Melbourne, the quality of your training provider matters. Go Workplace Training has been delivering WorkSafe-approved high-risk work licence training for over 20 years. We are one of Victoria’s most experienced RTOs in this space.

What sets us apart:

• WorkSafe-approved – our courses are recognised and approved by WorkSafe Victoria
• Nationally recognised – your qualification is recognised across all Australian states and territories
• Experienced trainers – our instructors bring real-world industry experience to every session, not just textbook knowledge
• Dedicated facilities – our Dandenong South site includes purpose-built crane training equipment and a safe, controlled environment for practical assessments
• Flexible options – 4-day (with pre-study), 5-day, and weekend delivery options available
• Inclusive training – we welcome students with diverse learning needs and will work with you to find the right support
• Comprehensive course materials – learner guides, activity books, and pre-study resources included

Whether you’re an individual operator looking to upskill, or a business sending multiple team members through high-risk work licence training, we’re equipped to handle it.

The demand for licensed crane operators in Melbourne and across Victoria is strong and consistent. Once you hold your C6 crane licence, you’ll be qualified to work across a wide range of industries:

• Commercial construction – high-rise residential, office towers, mixed-use developments
• Civil construction and infrastructure – roads, bridges, tunnels, and public infrastructure projects
• Industrial and manufacturing – plant installation, heavy equipment handling
• Mining and resources – open-cut and underground mining operations across regional Victoria and interstate
• Transport and logistics – heavy haulage, port operations, and load-shifting
• Utilities and energy – infrastructure maintenance, renewable energy construction (wind, solar)
• Demolition and remediation – site clearing and structural demolition

Licensed crane operators are in consistent demand, and holding a C6 licence opens the door to well-paid site work across Victoria and nationally. Many employers will not hire crane operators without a valid High Risk Work Licence, making this course an essential step for anyone serious about a career in crane operation.

For detailed information about the course, unit requirements, and assessment outcomes, refer to the following:

1. TLILIC0023 Licence to operate a slewing mobile crane (up to 60 tonnes) – full unit requirements, elements, and performance criteria
2. Course Information Document – course structure, delivery method, and assessment overview
3. Resources Tab – fee schedules, refund policy, complaints procedures, student support services, and pre-enrolment documents
4. Contact Us – speak directly with our team about enrolment, eligibility, or scheduling

Our C6 crane training takes place at our dedicated facility in Dandenong South, Melbourne equipped with operational slewing mobile cranes and a purpose-built training environment that replicates real worksite conditions. Students complete their practical assessments on-site under the supervision of qualified trainers and WorkSafe-approved assessors.

The Dandenong South facility is conveniently located at 16 Kitchen Road, with easy access from the Monash Freeway (M1) and Princes Highway, making it one of the most accessible crane training locations in Melbourne’s south-east.